Hand Arm Vibration Meter - Castle Vexo H GA2006H

01GA2006H

Quick Overview

The Castle Vexo H is the UK's best selling Hand Arm Vibration Meter, and gives the user everything needed to carry out vibration measurements on power tools.


With a simple to attach tri-axial accelerometer, simultaneous X, Y and Z readings are taken and displayed on the screen in real time.


Measurements can be taken in M/S2 or in G, and results are given for Aeq, Peak and Vector Sum. Measured data is also calculated into the HSE's easy to use colour coded points system, and also displays the Exposure Action Value (EAV) and Exposure Limit Value (ELV) times.

Watch the video demonstration below

£1,995.00

Talk to an expert about this product




£1,995.00

You may also be interested in the following product(s)

Brand Castle Group
Measurement Hand Arm Vibration
Available Outside the UK? Yes

Hand Arm Vibration Meter - Vexo H

The Castle Vexo H is the UK's best selling Hand Arm Vibration Meter, and gives the user everything needed to carry out vibration measurements on power tools.

With a simple to attach tri-axial accelerometer, simultaneous X, Y and Z readings are taken and displayed on the screen in real time.

Measurements can be taken in M/S2 or in G, and results are given for Aeq, Peak and Vector Sum. Measured data is also calculated into the HSE's easy to use colour coded points system, and also displays the Exposure Action Value (EAV) and Exposure Limit Value (ELV) times.

Measure vibration levels with the Vexo H Tri-Axial Vibration meter and reduce your risk of hand arm vibration syndrome (HAVS). This powerful meter is capable of accurate measurements while remaining simple to use.

Designed with only 3 operational buttons, it is possible to take measurements with ease which can be easily read on the large colour display or stored for later download to VibdataPro Vibration Analysis Software. The rechargeable battery pack also ensures your vibration meter is ready and waiting whenever you need it.

Built to be tough, in a small and rugged case, the Vexo H Hand-Arm Vibration Meter can be used anywhere and effectively measure vibration exposure to ensure HAVS doesn't become a problem with your workforce.

Vexo H - Features:

  • Tri-axial vibration meter
  • Fully compliant with ISO 8041 : 2005
  • Large dynamic range
  • Re-chargeable battery pack and charger
  • Large 'Flash' memory
  • Rugged accelerometer and cable
  • Large colour display
  • Only 3 operational buttons for simple use

Technical Specification

Instrument Standards: ISO 8041 : 2005 Human Response to Vibration For compliance with: ISO 5349 : 2001 Measurement and evaluation of human exposure to hand-transmitted vibration Range: (Integration = Acceleration) Low: 0.05 - 200.0m/s-2 / 0.005 - 20.4g High: 0.50 - 2000.0m/s-2 / 0.50 - 204.0g Measurement Channels: One Parameters: Acceleration: Arms, Aeq, Amax, Peak, Vector Sum, Exposure Points Linear Operating range: 72 dB Frequency Weighting: WH - Hand Arm Filter Memory: Flash memory storing up to 992 recordings Transducer: Castle KD1010, 10mV/g Noise Floor: <0.002 m/s-2 - Low Range <0.020 m/s-2 - High Range Display: Full Colour Graphic OLED Display (160 x 128) Batteries: NiMH re-chargeable cell pack Typically 10 hours continuous use Connections: Input: 3.5mm Stereo Jack Socket AC Output: 4 Pole 3.5mm Jack Socket Download: USB Micro B (Cable Supplied) Recharge: DC Socket (Charger & Cable Supplied) Environmental: Temperature Operating Range: -10 to + 50ºC Humidity: Up to 90% RH Non Condensing Electromagnetic Compatibility: Designed in accordance with the following Electromagnetic Compatibility Directives: SI 2005/281 2004/108/EC Case: High Impact ABS plastic with tactile membrane keypad
5.0 out of 5 from 1 review
  1. The Vexo itself is just so easy to use

    By on 26th August 2015
    Quality
    Price
    Value

    5.0 out of 5
    Following a number of online enquiries I chose Castle Training Academy to provide me with Human Vibration training. The manner in which Castle presented themselves and the whole structure of the course was great.
    Upon completion of the training I then had a requirement to purchase a Hand Arm Vibration meter to measure the vibration levels of our tools as part of our vibration risk assessments. I was already aware of and familiar with the Castle Vexo meter as we had used it during the practical sessions on the course.

    When the order was placed, I asked if could pick up my order in person and if it would also be possible for somebody to quickly run through it with me, to which Castle happily agreed.

    I was very impressed with the run through of the product that Castle gave, assisting me until I felt confident enough to go and take my own measurements. The Vexo itself is just so easy to use. Operating the meter and the VibDataPro software is so logical that at first I thought I must be missing something!

    My after sales support has been excellent, and I have spoken to Castle on the telephone a few times for different reasons, not only about the product but also for general measurement advice which they were more than happy to assist with.

    I would definitely consider Castle for any requirements I may have in the future.

  2.  

Write Your Own Review

Only registered users can write reviews. Please, log in or register